Brush Set RFQs: Check the Hanging Pack

Nov 21, 2026 | Industry Trends

Brush Set RFQs: Check the Hanging Pack

When buying wholesale daily brush sets for a pegged display, ask for a filled selling pack and test it on the actual fixture before approving the order. Check the opening shape, where it sits on the pack, the way the filled pack faces, and the space it leaves beside neighbouring packs. Give the supplier the fixture reference and keep a loaded sample with the purchase record.
Start from the listed 11-piece set and identify the offered pack
The official silver glitter brush set page shows an 11-piece assortment. An inset in one gallery image shows the brushes in a pouch with an opening near the top. Reference that inset when asking whether the proposed retail pack uses the pictured pouch or a different format. Ask the supplier to identify the exact version included in the quote.
Send a drawing or clear photo of the display hook before requesting a sample. Show the section the pack must pass over and any bend or tip on the hook. Include a side view of the fixture if it changes how the pack will be loaded. A buyer working across several stores can ask for one trial per relevant fixture and record which combination each result covers.
Identify the catalogue set and ask for the exact filled retail pack and its hanging opening.
Measure the opening against the hook you actually use
Ask the supplier to mark the clear opening width and height and identify the points used for those dimensions. Record the shape of the opening and its position relative to the top and side edges. If there is a top seam or closure close to the opening, ask for an image showing that spacing on the proposed pack. Include the measurement convention in the sample record.
Check a filled pack by placing it on the actual fixture, observing how it passes the hook tip and where it sits after loading. Record any step in which the opening needs to be bent or the pack turned. If the result is inconvenient, ask the supplier for a revised sample with the proposed opening location or geometry shown on its drawing.
Judge how the loaded pack hangs and faces
Hang one completed pack and photograph it from the customer side and from the side of the fixture. Include the upper edge so the buyer can see whether the pouch hangs as intended. The official close-up shows brushes with visibly different head profiles. Use it to identify the assortment when asking for the loaded sample, then inspect the hanger using the proposed retail pack itself.
Check how the actual filled pack sits around the brush heads and decorative handles.
Ask the supplier to keep the planned brush orientation when filling the sample. Once it is hanging, note whether the pack leans or turns and whether the front is identifiable from the aisle. If a label, insert, or brand panel needs to face forward, mark that requirement on the sample photo and ask the supplier to repeat the trial with the final materials.
Add a row of filled samples to the same fixture if the store will display several packs together. Record the available spacing and any contact with adjacent packs or fixture hardware. If a store uses a different display pitch or hook, retain a separate record for that setup so the warehouse or retail team can reproduce what purchasing approved.
Approval point
Evidence to request
Record to retain
Opening shape and position
Marked view of the offered pack with clear measurements.
Pack revision and reference edges.
Hook entry
Filled sample passed over the actual hook tip.
Fixture identifier, view of the tip, and trial observation.
Front presentation
Front and side photographs of the suspended filled pack.
Approved facing and any specific label or panel orientation.
Adjacent packs
Trial on the intended fixture with nearby filled packs in place.
Hook spacing and observed contact or clearance.
Use the catalogue view to identify the set while requesting an actual front and rear fixture trial.
Carry the approved hanger through the order
Put the fixture reference, pack drawing revision, and sample identifier on the approval sheet. Keep the gallery picture as a reference for the assortment, and use the dated hanging photographs to identify the accepted pack. Tell your receiving team how to compare the opening and orientation on incoming samples with the retained example, especially if the packs are sent to several stores.
If the supplier proposes a different pouch construction, ask for the new drawing and repeat the fixture check with a filled sample. Note which stores or fixtures the revision covers before updating the order. Keep any change in the count or identity of the brush assortment on its own line so a packing update cannot alter the agreed set by accident.
Questions buyers can ask about a hanging brush pack
Can a catalogue image approve the hanger opening?
Use the image to identify the option you want to discuss. Request an actual loaded pack, measured opening, and trial on your fixture for the approval record.
Should I test an empty pouch first?
An empty pouch can help during an early drawing discussion. Make the final observation with the offered assortment and any planned insert or label inside the sample.
What changes should trigger another review?
Check again when the opening, pouch, contents arrangement, or fixture changes in a way that could affect loading or facing. Tie each reviewed combination to the corresponding purchase order.
To request the silver 11-piece set, contact BYM Cosmetics with the hook reference, pack orientation, and a description of the display space. Ask for a loaded pack and keep its approval record with the quote.
wholesale daily brush setsB2B supplier sample record

Get a Free Quote

Fill in the form and we'll get back to you within 24 hours.